History Foundry Manufacturing Engineering Metallurgical Lab Facility
Media Videos
- - - - NEW - - - - LR SERIES --------------------- 6060 SXS 6080 SXS 60 SXS 80 SXS 98 SXS 100 SXS 120 SXS 124 SXS

LR Series Opens Doors, Shreds Them

The LR-type shredder offers a low cost solution for recyclers looking to corner a select market. Perfect for ventures in untested regions, the "Little Rascal" can launch a new campaign or optimize an existing one. A minimal price, optional transportable layout, and TSC World Best quality make an LR machine an advanced tool for any metal recycler.

It is the ideal starter kit for a new shredding operation or it is a valuable tool for an established shredding operation which wants to process shreddable scrap steel in an area with limited amounts of suitable raw material. The LR 6060, LR 6080 and the LR 6096 SXS can operate successfully with a very minimum of investment (as low as $2,000,000) at 10 tons per hour. There are a number of options that can increase production to as much as 60 tons per hour. This allows the operator/investor to choose the exactly correct equipment configuration that will provide the greatest return on your investment.

 

The Basic Design

  • Simple feed chute
  • Single powerful feed roller (two variable speed 40 HP drive units)
  • In Transportable Configuration it is a top discharge shredder
  • In the Permanent Configuration, it can be a top discharge or a top and bottom discharge.
  • Proven 60 inch (1.5 meter) diameter hammer swing
  • Wide 96 inch (2.4 meter) wide internal clearance in side of the shredder which allows shredding of complete automobiles
  • Proven Disc 9 disc rotor
  • Discharge Vibrator to feed 60 inch wide Magnet
  • 48 inch wide stacking conveyor for shredded steel
  • 24 inch wide stacking conveyor for waste and non ferrous metals
All of the above equipment is mounted on a single frame that sits flat on the ground or on a simple concrete slab. All of the following equipment is to be installed either on trailers (one enclosed van and one open flat trailer) if the Transportable Configuration is chosen or in a building if a Permanent Configuration is chosen:
  • Motor Control Center (MCC), it includes the electrical switch gear and motor controls for every electrical motor in the installation.
  • Smart Shredding System (SSS)
  • Smart Water System (SWS)
  • 100 HP hydraulic power unit for feed roller, reject door and maintenance (pin puller, midsection opening device)
  • Control cabin for operator (can be operated from ground or on trailer in transportable configuration).
  • Main motor sizes from 500 HP to 2000 HP
  • Capacity expressed in tons per hour of finished shredded steel product.
  • This will vary depending on main drive horsepower, which can be diesel engine or electric motor

Technical Parameters


Shredder Index

Contract All | Expand All

Shredder Sizes

Shredder Features